Raw water is forced through the ion exchange resin that is charged with salt ions. The hard water, including iron and manganese are attracted to the ion exchange resin. An equal amount of sodium ions are bumped off into the water supply.
The highly efficient controller automatically initiates a cleaning cycle based on the amount of hardness minerals in the water and size of the resin bed. During regeneration the trapped mineral particles are flushed down the drain.
Electricity cost is less than $5 a year. Soft-n-Klear water softeners use only the highest level clack controller, the industry leader in computerized control heads.
We use 10% crosslink commercial resin as opposed to the 8% used by our competitors. 10% resin is stronger and last up to 2x longer in harsh conditions. It holds up better making the Softener more efficient over its lifespan.
When hardness is removed, colors are brighter and stain removal increases dramatically.
Hard water can result in almost 50%reduction in efficiency. Softened water saves up to 57% in operating cost.
Softened water extends the life of appliances and reduces repair cost due to hard water. Your faucets, shower heads, appliances, and plumbing will last much longer.
Up to 70% less detergent is needed with softened water. Soil removal on dishes is up to 12x more effective than adding detergent. Hardness spots virtually eliminated.
Using a whole house carbon prefilter virtually eliminates harsh chlorine and other organic compounds. It will be like drinking and showering with bottled water.
Leading Brand’s
Softener
Commercial grade resin lasts up to 2x times longer than standard resins.
With our special programming and knowledge of water chemistry, the softener is programed for maximum efficiency.
Soft-n-Klear water Softeners use only the highest level Clack controller, the industry leader in computerized control heads.
Low cost – less than $5.00 per year in electricity.
Raw water is forced through the ion exchange resin that is charged with salt ions. The hard water minerals including ferrous iron and manganese are attracted to the ion exchange resin, and an equally amount of sodium ions are bumped off into the water supply. The amount of sodium in your drinking water is typically 18 milligrams per liter.
The highly efficient Soft-n-Klear controller automatically initiates a cleaning cycle based on the amount of hardness minerals in the water and size of the resin bed. During regeneration the trapped mineral particles are flushed down the drain.
Experience the highest quality of water. We look forward to working with you.